T-Shirt transfer paper (for light fabrics if you are using white twill tape), sharp scissors, Twill tape (the width is up to you and will depend on how wide you would like your labels) **I used 1.5cm width**
In the pack you will get full instructions on how to use the transfer paper (2).Using a program like CorelDraw or Photoshop (you could also do this in Word or similar) layout a grid, each little box should be a little bit wider than your tape and however long you require them to be. **I always add a little extra length to allow the edges to be folded in before sewing to the item.
In the first box, layout your design as you would like to see it on your label, flip it so the image/text is back to front (don't worry when you iron it to your tape it will be the correct way) copy the process in every box until you get a full sheet. Print a test page on a normal piece of paper just to make sure every thing is lined up as you want it. If you're happy with it print your sheet onto a piece of transfer paper (3.) **In photo 3 the sheet towards the back is the copy on paper, the one to the front is on the transfer paper**
Using a paper cutter or scissors cut your labels into strips (4) then cut into individual labels (5)
Now you have a lovely pile of transfer labels (6) take one of your labels and place on your twill tape (7) you can just see your design through the backing so make sure its centered.
Using the tip of your iron secure the label down the centre (8), leaving the top and bottom edges free (9) cut from the roll of tape.
Take your label and trim the top and bottom edges as close to the tape as you can (10). Apply heat with your iron to fully transfer the label (11).











